5069-SERIAL

Specifications

Communication

RS232C & RS422 (Full Duplex), RS485 (Half Duplex)

Depth

105mm, 4.15"

Height

145mm, 5.69"

Isolation

250V(cont);No isolation

Number Of Channels

2

ATEX temp code

T4

Conducted RF immunity

10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz

DIN rail

Compatible zinc-plated chromate-passivated steel DIN rail, You can use the EN50022 - 35 x 7.5 mm (1.38 x 0.30 in)

EFT/B immunity

±4kV @ 5kHz on power ports, ±3kV @ 5kHz on shielded output ports

Emissions

IEC 61000-6-4

Enclosure type

None (open-style)

ESD immunity

6 kV contact discharges, 8 kV air discharges

Handshaking

RTS/CTS hardware handshake always enabled, RTS/CTS can be controlled by the user

Indicators

1 green/red module status indicator, 1 transmit data (TXD) and 1 receive data (RXD) yellow/red status indicator per channel

Inputs

2 full-duplex (RS-232, RS-422), 2 half-duplex (RS-485)

IO link master

0

Isolation voltage

250V (continuous), basic insulation type, SA and MOD power to backplane, 250V (continuous), basic insulation type, backplane to communication channels, 250V (continuous), basic insulation type, backplane to chassis ground, 250V (continuous), basic insulat

MOD power

100mA @ 18...32V DC

MOD power passthrough, max

9.55A @ 18...32V DC

Module keying

None

Nonoperating temperature

-40 °C

Operating mode

Generic ASCII, Modbus RTU, Modbus ASCII

Operating temperature

0 °C <Ta <60 °C (32 °F <Ta <140 °F)

Power dissipation, max

2.8 W

Radiated RF immunity

10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz

Redundancy

0

Relative humidity

5...95% noncondensing

RTB keying

None

SA power passthrough, max

9.95A @ 0...32V DC

Serial input voltage signal

3...25V DC regarding signal ground (SG) 0, asserted, ON, space, active, -3...-25V DC regarding signal ground (SG) 1, disasserted, OFF, mark, inactive

Serial port connectors

Two DB-9 male with pin

Shock

Operating: 30 G, Non operating: 50 G

Slot width

1

Supporting protocol for ASI

0

Supporting protocol for AS-Interface Safety at Work

0

Supporting protocol for CAN

0

Supporting protocol for Data-Highway

0

Supporting protocol for DeviceNet

0

Supporting protocol for DeviceNet Safety

0

Supporting protocol for EtherNet/IP

1

Supporting protocol for Foundation Fieldbus

0

Supporting protocol for INTERBUS

0

Supporting protocol for INTERBUS-Safety

0

Supporting protocol for KNX

0

Supporting protocol for LON

0

Supporting protocol for Modbus

0

Supporting protocol for other bus systems

0

Supporting protocol for PROFIBUS

0

Supporting protocol for PROFINET CBA

0

Supporting protocol for PROFINET IO

0

Supporting protocol for PROFIsafe

0

Supporting protocol for SafetyBUS p

0

Supporting protocol for SERCOS

0

Supporting protocol for SUCONET

0

Supporting protocol for TCP/IP

0

Surge transient immunity

±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±2 kV line-earth (CM) on shielded output ports

Surrounding air temperature, max

60 °C

Thermal dissipation, max

9.6 btu/h

Transmit transaction ID

0...255

Type of data transmission

Module rack extension

Vibration

5 G @ 10...500 Hz

Weight

175 g

Width

22 mm

Wire category

2 - power ports, 2 - communication ports

With optical interface

0

With potential separation

0

Bulletin

5069

Series

A

Lifecycle Status

Active