1762-OX6I

Specifications

Power

6 Point 24 VDC Isolated High Current Relay Output Module

Class

Progmable Logic Controller

Depth

87

digital output modules

6 Point 24V DC Isolated High Current Relay Output Module

Height

90

I/O Isolation

Isolated

I/O Status Indication

LED

Module Interfaces

relay output

Number Of Channels

6 point

Output

6 Point, Isolated AC/DC Relay

Special Features

Isolated

Temperature Rating

0…55 °C (32…131 °F)

Altitude

2000 m

Bus current draw, max

110mA @ 5V DC (0.55 W)

Conducted RF immunity

IEC 1000-4-6: 10V @ 0.15...80MHz

Continuous current per common, max

7 A

Controlled load current per module, max

6A @ 240V AC

Digital inputs configurable

0

Digital outputs configurable

0

EFT/B immunity

IEC1000-4-4: 2kV @ 5kHz

ESD immunity

IEC1000-4-2: 4kV contact, 8kV air, 4kV indirect

Hazardous environment class

Hazardous Location, Class I, Division 2 Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 No. 213)

Heat dissipation, max

2.8 W

Isolated groups

All 6 Outputs Individually Isolated

Number of digital outputs

6

Off-state leakage current, max

0 mA

On-state current, min

100 mA

Operating humidity

5...95% noncondensing

Operating temperature

-20 to 65 °C

Operating voltage

5...265V AC

Output group to backplane isolation

Verified by one of the following dielectric tests: 1836V AC @ 1s or 2596V DC @ 1s, 265V AC working voltage (IEC Class 2 reinforced insulation)

Output group to output group isolation

Verified by one of the following dielectric tests: 1836V AC @ 1s or 2596V DC @ 1s, 265V AC working voltage (basic insulation), 150V AC working voltage (IEC Class 2 reinforced insulation)

Power supply distance rating

6 (The module may not be more than 6 modules away from the power supply.)

Radiated and conducted emissions

EN50081-2: Class A

Radiated RF immunity

IEC1000-4-3: 10 V/m, 80...1,000 MHz, 80% Alitude modulation, +900 MHz keyed carrier

Redundancy

0

Relay output, break

7A @ 24V DC

Relay output, break volt-ampere

50VA @ 125V DC

Relay output, continuous

7A @ 24V DC

Relay output, make

7A @ 24V DC

Relay output, make volt-ampere

50VA @ 125V DC

Shock

Operating: 30G panel mounted, 3 pulses per axis Relay ops: 7G

Short-circuit protection, outputs available

0

Signal delay, resistive load

ON delay: 10 ms (max) 6 ms (typical) OFF delay: 20 ms (max) 12 ms (typical)

Storage temperature

-40 °C

Suitable for safety functions

0

Surge transient immunity

IEC1000-4-5: 2 kV common mode, 1 kV differential mode

Type of digital output

Relay

Type of electric connection

Screw connection

Type of output voltage

AC/DC

Vibration

Operating: 10...500 Hz, 5G, 0.030 in. max. peak-to-peak, 2 hr per axis Relay ops: 1.5G

Voltage category

AC/DC Type C relay

Weight

220 g

Width

40.4 mm

Bulletin

1762

Series

A

Lifecycle Status

Active Mature