1756-IF4FXOF2F

Specifications

Display

Module Health, In Calibration,Mode

Input Signal

+/- 10V, 0-10.5V, 0-5.25V.,0-21mA

Isolation

None between channels (Single,Ended)

Output Signal

+/- 10.4V, 0-21mA

Special Features

Sub-ms channel scans,Synchronized sAling across,multiple modules

Analogue inputs configurable

1

Analogue outputs configurable

0

Calibrated accuracy

Input: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F), Output: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F)

Conducted RF immunity

10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports

Current draw

375mA @ 5.1V, 100mA @ 24V

Data format

Integer mode (left justified, 2 s complement) IEEE 32-bit floating point

Drive capability

Voltage: >2000 Ω, Current: 0...750 Ω

EFT/B immunity

±2kV @ 5kHz on shielded signal ports

Emissions

IEC 61000-6-4

Enclosure type rating

None (open-style)

ESD immunity

6 kV contact discharges, 8 kV air discharges

Gain drift with temperature

Voltage: 25 ppm/°C maximum, input, Current: 35 ppm/°C maximum, input, Voltage: 25 ppm/°C maximum, output, Current: 50 ppm/°C maximum, output

Input conversion method

Successive approximation

Input, current

1

Input impedance

Voltage: >1 MΩ, Current: 249 Ω

Input range

±10V @ 0...10V, 0...5V @ 0...20mA

Input, resistance thermometer

0

Input, resistor

0

Input signal, configurable

1

Input, thermocouple

0

Input, voltage

1

Isolation voltage

250V (continuous), Reinforced insulation type, inputs and outputs to backplane, No isolation between individual inputs or outputs

Module error

Input: 0.2% of range, Voltage: 0.2% of range, output, Current: 0.3% of range, output

Module keying

Electronic, software configurable

Module scan time

300 µs minimum

Nonoperating temperature

-40 °C

North American temperature code

T4A

Number, input

4 high-speed, subms, differential

Number, output

2 high-speed voltage or current

Offset drift

50 µV/°C, 1 µV/°C

Open circuit detection time

Input: Positive full-scale reading within 1 s, Output: Current output only (output must be set to >0.1 mA)

Operating temperature

0 °C <Ta <60 °C (32 °F <Ta <140 °F)

Output conversion method

R-Ladder DAC, monotonicity with no missing codes

Output, current

0

Output range

±10V, 0…20 mA

Output settling time

<2 ms to 95% of final value with resistive loads

Output signal configurable

0

Output, voltage

0

Overvoltage protection

Voltage: 30V DC, input, Current: 8V AC/DC, input, Output: 24V DC

Power consumption

4.3 W

Power dissipation

Voltage: 4.3 W, Current: 4.7 W

Radiated RF immunity

10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2700...6

Relative humidity

5...95% noncondensing

Repeatability

±1 least significant bit (LSB)

Resolution

Input: Approx 14 bit across ±10.5V DC (21V total), ±10.5V range: 1.3 mV/bit, 14 bit effective, 0...10.5V range: 1.3 mV/bit, 13 bit effective, 0...5.25V range: 1.3 mV/bit, 12 bit effective, Approx 12 bit across 21mA @ 0...21mA range: 5.25 µA/bit, Output

RTB keying

User-defined mechanical

Shock

Operating: 30 G, Non operating: 50 G

Short circuit protection

Electronically current limited to 21 mA or less

Slot width

1

Suitable for safety functions

0

Surge transient immunity

±2 kV line-earth (CM) on shielded signal ports

Surrounding air temperature, max

60 °C

Terminal block torque specifications

1756-TBCH: 0.5 Nm (4.4 in-lb)

Thermal dissipation

Voltage: 14.66 BTU/hr, Current: 16.02 BTU/hr

Type of electric connection

Screw-/spring clA connection

Update period for all channels (RPI), min

1 ms

Vibration

2 G @ 10...500 Hz

Voltage and current ratings

Backplane: 375mA @ 5.1V DC, 100mA @ 24V DC, Analog inputs: -10...+10V @ 4...20mA, Analog outputs: -10...+10V @ 4...20mA

Wire category

2 - on signal ports

Wire size

Single wire connection (1756-TBCH): 0.33...2.1 mm² (22...14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation maximum, Single wire connection (1756-TBS6H): 0.33...2.1 mm² (22...14 AWG) solid or

Bulletin

1756

Series

B

Lifecycle Status

Active